When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.
  • When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.

Add Comment

Turn the phone face-down. Remove the back cover, exposing the battery.
  • Turn the phone face-down. Remove the back cover, exposing the battery.

  • Use the Plastic Opening Tool to pry the battery out of the phone.

Add Comment

Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.
  • Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.

  • Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.

Add Comment

After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.
  • After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.

Add Comment

Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.
  • Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.

Add Comment

On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.
  • On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.

Add Comment

You should now have all of the pieces separated and disassembled for your device.
  • You should now have all of the pieces separated and disassembled for your device.

Add Comment

Complete steps for removing battery and front cover in order before continuing on to motherboard
  • Complete steps for removing battery and front cover in order before continuing on to motherboard

Add Comment

Remove all technical componets
  • Remove all technical componets

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rich

Member since: 04/08/2013

101 Reputation

6 Guides authored

Team

SUNY Cortland, Team 1-4, Getto Spring 2013 Member of SUNY Cortland, Team 1-4, Getto Spring 2013

SUNYCORT-GETTO-S13S1G4

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 155