Motorola Moto Z Force Droid Digitizer Replacement

Step 1 LCD Screen and Digitizer Assembly

• Only the LCD screen and digitizer assembly remains.
• Check carefully to make sure your replacement part matches, and that you've removed all the necessary parts from the old frame for installation in the new one.
Step 2 Digitizer




• Take the front assembly.
• Remove the copper tape with a pair of tweezers.
Step 3
• Lift the digitizer wiring with a pair of tweezers but do not pull out the wiring.
• Do not use a heat gun to remove the tape.
Step 4
• Begin to separate the front screen from the metal plate with the plastic opening tool.
Step 5
• Carefully fold the digitizer such that it ends up in the middle of the wiring plate.
• Gently pull the metal plate off of the digitizer in a slight counterclockwise manner as to not damage the wiring plate.

Author

with 7 other contributors

Kenji Fong

Member since: 01/23/18

1,606 Reputation

4 Guides authored

Badges: 13

• 
• 
• 

+10 more badges

Team

Cal Poly, Team S1-G1, Livingston Winter 2018 Member of Cal Poly, Team S1-G1, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G1

4 Members

4 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview