Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Follow this guide to remove and replace the USB board.

  1. pull back plate off starting with this tab pull back plate off starting with this tab
    • pull back plate off starting with this tab

  2. remove 16 00 philips screws pull up sticker with tweezers to reveal the last screw no screw here
    • remove 16 00 philips screws

    • pull up sticker with tweezers to reveal the last screw

    • no screw here

    • remove battery sd card, and sim card

  3. disconnect antenna with spudger disconnect data cable with spudger Remove 2 00 philips screws
    • disconnect antenna with spudger

    • disconnect data cable with spudger

    • Remove 2 00 philips screws

    • carefully remove USB board and vibrator together

    • disconnect vibrator from board with spudger.

    • Pull the rubber support gasket off of the old usb port.

Michael Cottone

Member since: 09/09/2017

810 Reputation

2 Guides authored

Team

Cottone Computing Member of Cottone Computing

Business

1 Member

2 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 14

All Time: 1,040