Skip to main content

Free Shipping on Domestic Orders $75+

Motorola Edge Battery Disconnection

Views: 217

View statistics:

Past 24 Hours:
0
Past 7 Days:
0
Past 30 Days:
9
All Time:
217
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: No estimate
Difficulty: Moderate
Motorola Edge Battery Disconnection
Prerequisite Only This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Introduction

Go to step 1 ↓

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

What you need

Tools

  • Spudger
    4.9
    1. Motorola Edge Battery Disconnection, Disconnect the battery cable's press connector: step 1, image 1 of 2 Motorola Edge Battery Disconnection, Disconnect the battery cable's press connector: step 1, image 2 of 2
      • Use a spudger to pry up and disconnect the battery cable's press connector from the motherboard.

      • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Jennifer Berg

Member since: 03/21/22

2,896 Reputation

24 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 9

All Time: 217