Introduction

This guide will teach you the inner workings of both the motor and cord. You will need to know how to use a screwdriver as well as pliers. Make sure to familiarize yourself with the basics of crimping.

Parts

  1. Remove the highlighted screws shown with a Phillips #2 Screwdriver.
    • Remove the highlighted screws shown with a Phillips #2 Screwdriver.

  2. Remove the motor from the motor mounting plate. Pull the motor and cord to the side.
    • Remove the motor from the motor mounting plate. Pull the motor and cord to the side.

  3. Use pliers to grip the crimp.
    • Use pliers to grip the crimp.

  4. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  5. Open the crimp by pressing it opposite to how the crimp was pressed. Repeat for second crimp.
    • Open the crimp by pressing it opposite to how the crimp was pressed. Repeat for second crimp.

  6. Remove the crimps from the wires by pulling them off.
    • Remove the crimps from the wires by pulling them off.

  7. Untwist the brown and the silver wire by gripping the tip and unwinding them. Do the same for the second wire.
    • Untwist the brown and the silver wire by gripping the tip and unwinding them. Do the same for the second wire.

  8. Separate the cord and motor.
    • Separate the cord and motor.

    • Now, depending on whether the cord or the motor was broken, head to the device page to order a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kamal Taha

Member since: 08/27/2015

615 Reputation

5 Guides authored

Team

USF Tampa, Team 1-3, Sullivan Fall 2015 Member of USF Tampa, Team 1-3, Sullivan Fall 2015

USFT-SULLIVAN-F15S1G3

3 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 32

All Time: 1,853