Moosoo XL-618A Microscreen Filter Replacement

Introduction

The microscreen filter in a Moosoo XL-618A vacuum is a filter that removes large bits of debris from the vacuum, while the HEPA filter inside filters smaller air particles. The microscreen filter can be found in the dust seal container at the top of the vacuum. It should be replaced when it gets too dirty or damaged. Here is a guide to replace it.

Step 1 Microscreen Filter

Moosoo XL-618A Microscreen Filter Replacement, Microscreen Filter: step 1, image 1 of 2

Moosoo XL-618A Microscreen Filter Replacement, Microscreen Filter: step 1, image 2 of 2

Press the blue button on the exterior of the device to open the hatch.
If the seal contains debris or trash, be sure to hold it over a garbage can.

Edit

Step 2

Remove the microscreen filter by twisting it to the left and pulling it out.
Don't be alarmed if both filters come out together; the HEPA filter comes out very easily.

Edit