Fix Your Stuff Community Store

Moosoo XL-618A Floor Brush Replacement

Introduction

The floor brush is the cylindrical brush on the bottom of the Moosoo XL-618A vacuum. The floor brush is what picks up the dirt and debris on the floor when vacuuming. It also keeps the air floor close to the ground so not dust gets further up in the air. Here is a guide to replace the floor brush.

What you need

  1. Moosoo XL-618A Floor Brush Replacement, Floor Brush: step 1, image 1 of 1

    • Remove the eight 11 mm screws on the bottom of the vacuum with the Phillips #1 screwdriver.

    Edit

  2. Moosoo XL-618A Floor Brush Replacement: step 2, image 1 of 2 Moosoo XL-618A Floor Brush Replacement: step 2, image 2 of 2

    • Pull the two hard plastic covers off of the floor brush piece.

    Edit

  4. Moosoo XL-618A Floor Brush Replacement: step 3, image 1 of 2 Moosoo XL-618A Floor Brush Replacement: step 3, image 2 of 2

    • Pull the motor and floor brush attachments out of their slot.

    Edit

  5. Moosoo XL-618A Floor Brush Replacement: step 4, image 1 of 1

    • Pull the floor brush off of the motor.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Siella Wilcock

Member since: 09/20/23

112 Reputation

1 Guide authored

Badges: 5

+2 more badges

Team

Utah Tech University, Team 1-1, McMurrin Fall 2023 Member of Utah Tech University, Team 1-1, McMurrin Fall 2023

UTAHTECH-MCMURRIN-F23S1G1

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 116