Introduction

The sound can sometimes get muffled through both earpieces which probably means there is an issue in the speakers. If the speakers themselves are the problem, then there may not be much of a chance of repairing the existing pair. If the speaker is not functioning properly it may need to be replaced altogether.

Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws. Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.
  • Remove the ear cushions and use a Phillips #2 screwdriver to unscrew the three 5mm screws.

Add Comment

  • Desolder the wires to completely remove the speaker.

  • Take note of the proper location of the wires reassembly.

Add Comment

Deck the Halls
With tools and Fix Kits
  • Use a heatgun to loosen the glue holding down the speaker.

  • Be careful to take safety precautions such as gloves as not to cause injury.

Add Comment

Pry the speaker out using a plastic opening tool or metal spudger.
  • Pry the speaker out using a plastic opening tool or metal spudger.

    • Using too much force will damage the headphones and the new speaker may not go back into place properly.

Add Comment

Insert new speaker and solder  the five wires into corresponding positions onto the new speaker.
  • Insert new speaker and solder the five wires into corresponding positions onto the new speaker.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin Costello

Member since: 03/22/2017

201 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 36

All Time: 386