Introduction

Oftentimes the ear cushions get ripped, and these will eventually need to be replaced. This has been known to be a very common issue when using these headphones.

If they are not ripped, they may just need to be put back into place and potentially glued down. Doing all this is very easy and will not require more than 5 minutes of your time.

Tools

Parts

No parts required.

Grab the ear cushion by the bottom, pull down, forward and then up to take off the cushion as a whole. Grab the ear cushion by the bottom, pull down, forward and then up to take off the cushion as a whole.
  • Grab the ear cushion by the bottom, pull down, forward and then up to take off the cushion as a whole.

Add Comment

Apply glue to paste cushion back on by applying it to the edges of the earpiece.
  • Apply glue to paste cushion back on by applying it to the edges of the earpiece.

Add Comment

Apply pressure on the cushion until the glue sets.
  • Apply pressure on the cushion until the glue sets.

    • Put cushion back on first

    • If this does not work, the ear cushion may need to be replaced.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sherry Xu

Member since: 03/22/2017

101 Reputation

1 Guide authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 15

Past 7 Days: 71

Past 30 Days: 243

All Time: 924