Step 1 Modem & WIFI Card Prerequisite


Tool used on this step:
Anti-Static Wrist Strap
$7.95
Buy



• Flip the computer over and place it on a clean level surface.
• Loosen the screws using a size #0 Phillips screwdriver.
• The screws do not come completely out.
• It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2



• Once the screws are loose, open the panel using a plastic opening tool to access the components below.
• The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-69377" src="https://www.ifixit.com/Guide/embed/69377/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-69377"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/69377" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview