Mio ALPHA 2 Screen Replacement

Introduction

To replace the screen of the Mio ALPHA 2, firstly you would need a proper repair toolkit. This is a relatively easy replacement as you would only need a Philip screwdriver with a PH0 head and tweezers. Be careful not to apply too much force or tug the cords inside.

This guide would be helpful if you're trying to replace the screen of your Mio ALPHA 2.

What you need

Step 1 Motherboard

Mio ALPHA 2 Screen Replacement, Motherboard: step 1, image 1 of 2

Mio ALPHA 2 Screen Replacement, Motherboard: step 1, image 2 of 2

Remove the four 6.7mm JIS #00 screws from the back cover.

Edit

Step 2

Mio ALPHA 2 Screen Replacement: step 2, image 3 of 3

Tool used on this step:

Tweezers

$4.99

Buy

Pull off the back cover of the watch
Use a pair of tweezers to flip up the retaining flap on the ribbon cable ZIF socket.
Remove the ribbon cable from its socket.