Introduction

If the camera's internal clock has stopped working or showing time, it may be necessary to replace the clock battery on the inside of the camera.

Parts

No parts required.

  1. Press up firmly on the back-cover release on the right side of the camera to release the back panel.
    • Press up firmly on the back-cover release on the right side of the camera to release the back panel.

    Add Comment

  2. Use a coin to twist open the battery compartment (twist counterclockwise).
    • Use a coin to twist open the battery compartment (twist counterclockwise).

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Use tweezers to lift off the battery compartment cover.

    Add Comment

    • Use tweezers to take out the old clock battery and replace it with a new one.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Conner Lawston

Member since: 04/21/2015

219 Reputation

2 Guides authored

One Comment

Will the camera itself stop working if there is no clock battery?

Olivia Ortiz - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 218