Fix Your Stuff Community Store

Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement

Introduction

The following repair guide shows how to remove and replace the chuck drive shaft in a Milwaukee Hex Impact Driver 2750-20.

What you need

  1. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Outer Casing: step 1, image 1 of 1

    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

    Edit

  2. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: step 2, image 1 of 1

    • Remove the drill casing to expose the drill's interior parts.

    Edit

  4. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: step 3, image 1 of 3 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: step 3, image 2 of 3 Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement, Chuck Drive Shaft: step 3, image 3 of 3

    • Pulling directly outward, remove the driver head from the motor assembly by picking it up out of the casing.

    Edit

  5. Milwaukee Hex Impact Driver 2750-20 Chuck Drive Shaft Replacement: step 4, image 1 of 1

    • Remove the drive shaft assembly from the motor coils.

    • There will be resistance when removing the drive shaft as there is magnetism working against you.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 10

All Time: 748