Parts

No parts required.

Introduction

This installation guide should be used when the batteries for the radio are out of power and new batteries need to be installed. The troubleshooting guide for this process can be found here.

Image 1/1:
  • First, apply pressure with your thumb on the top of the battery cover.

Add Comment

Image 1/1:
  • Next, pull down on the cover until it begins to slide.

Add Comment

Image 1/1:
  • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

Add Comment

Image 1/1:
  • Put the new batteries into their slots in the back case.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

James Tucker Dunn

Member since: 01/18/2013

347 Reputation

6 Guides authored

Team

Cal Poly, Team 19-43, Regan Winter 2013 Member of Cal Poly, Team 19-43, Regan Winter 2013

CPSU-REGAN-W13S19G43

3 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 45

Past 30 Days: 109

All Time: 5,155