Midea WHJ1705B Thermal Component Replacement

Introduction

In this guide, we will be replacing the thermal component of a Midea WHJ1705B Electric Kettle.

As an electric kettle begins to lose control of its temperature, more often than not it will begin experiencing problems of all kinds. If you notice this problem occurring in your own electric kettle, then rest assured that you have come to the right place! Finding spare parts for electric kettles can be difficult, so having a DIY solution (such as the one we use here) is crucial to repairing kettles such as this one.

Please unplug the kettle before beginning the repair process.

What you need

Step 1 Thermal Component

Midea WHJ1705B Thermal Component Replacement, Thermal Component: step 1, image 1 of 1

Use a T5 [Torx] screwdriver to remove the three screws from the base, and remove the bottom cover.

Edit

Step 2

Use a pair of needle-nose pliers to unplug the power cord at both ends of the heat pipe
WARNING: Make sure the kettle is completely unplugged from any power sources before attempting this as serious injuries could occur otherwise.

Edit

Step 3

Use a Phillips #0 screwdriver to remove the three screws on the left, right, and bottom that are attached to the assembly.

Edit

Step 4

Use a pry tool or sharp object to pry off the plastic frame holding the assembly.
Caution: Be careful to gently pry and not hurt yourself in the process of removal.

Edit

Step 5

Apply a small dab of thermal silicone approximately the size of a coin to the new assembly.
Repeat on the opposite side using the thermal silicone.

Edit

Step 6

Fix the new assembly into place.

Edit

Step 7

Use a Phillips #0 screwdriver to secure the new assembly into place with the three Phillips screws.

Edit

Step 8

Insert the red and blue heat pipe into the thermostat.

Edit

Step 9

Retrieve the three Torx T5 screws to secure the base.
Use the T5 [Torx] screwdriver to reattach the base to the assembly.
If you have misplaced or damaged any of the screws, refer to the tools section to learn where to buy more.

Edit

Conclusion

Congrats! If you have followed all the steps correctly then you have successfully managed to replace the thermal component on your electric kettle! To reassemble your device, refer back to steps 7-9.

2 other people completed this guide.