Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This replacement guide will help you with the following:

Completely remove the old kick-stand and install a new one.

  1. Turn the tablet so the back is facing up.
    • Turn the tablet so the back is facing up.

    • Lift the kickstand to access the screws.

    • Remove the two T5 Torx screws:

    • One from the left hinge

    • One from the right hinge

  2. To remove the kickstand, gently pull up until the three tabs slide out of the slots on the back of the device.
    • To remove the kickstand, gently pull up until the three tabs slide out of the slots on the back of the device.

Mark

Member since: 10/09/2013

543 Reputation

1 Guide authored

Team

Cal Poly, Team 8-20, Regan Fall 2013 Member of Cal Poly, Team 8-20, Regan Fall 2013

CPSU-REGAN-F13S8G20

4 Members

13 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 24

Past 30 Days: 145

All Time: 35,112