Tools

No tools required.

Parts

No parts required.

Switch off the phone.
  • Switch off the phone.

  • Remove the battery and any inserted SIM and memory cards.

  • Use a screwdriver Torx T6 and remove the 4x black screws.

Add Comment

There are several plastic locking clips hold the back cover to the frame.
  • There are several plastic locking clips hold the back cover to the frame.

  • Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

Add Comment

  • Unhook:

    • the touch screen flex cable

    • the LCD Display flex cable

  • Use a plastic tool lift up and remove the Logic board.

Add Comment

  • This is the logic board / main board - a front and rear view.

Add Comment

  • The Display metal shield is locked to the frame by 4x locking clips.

  • Use a tool with a sharp tip and careful unlock them and remove the shield.

Add Comment

  • The display is stuck tovthe touch screen glass with a double-sided adhesive tape.

  • Use a hair dryer or hot air gun and worm the glass to make adhesive soften.

  • Distort the frame a little and use a thin plastic tool to separate the display from the frame.

Add Comment

  • The display is very fragile, do the separation very carefully.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

ZFix

Member since: 12/09/2013

156,419 Reputation

304 Guides authored

Team

Master Techs Member of Master Techs

Community

277 Members

747 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 84