Introduction

Microsoft Lumia 435 - How to remove / replace the back cover.

Video Overview

Switch off the phone. Remove the battery and any inserted SIM and memory cards. Use a screwdriver Torx T6 and remove the 4x black screws.
  • Switch off the phone.

  • Remove the battery and any inserted SIM and memory cards.

  • Use a screwdriver Torx T6 and remove the 4x black screws.

Add Comment

There are several plastic locking clips hold the back cover to the frame. Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover. Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.
  • There are several plastic locking clips hold the back cover to the frame.

  • Use a tool with a sharp edge to unlock them and a plastic tool to separate the back cover.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

ZFix

Member since: 12/09/2013

133,435 Reputation

389 Guides authored

Team

Master Techs Member of Master Techs

Community

266 Members

638 Guides authored

One Comment

كيف اقوم بفك الهاتف وفحص الخلل الذي يوجد فيه .اعني ان هاتفي لا يقبل العمل اظن انه محروق كيف افحصه ؟

How do I remove the phone and to inspect the defect in which the .ani there is a telephone that does not accept the work I think it's seared how it checked ?

mohammad7salaheddin - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 5

Past 30 Days: 16

All Time: 575