Introduction

This guide will cover how to remove the screen of the Microsoft Band 2 smartwatch. If the display is blank or dim it may be advantageous to consider replacing the screen on the Band 2.

Wear proper gloves when using a heatgun.
  • Wear proper gloves when using a heatgun.

  • Use a heatgun to melt the adhesive beneath the screen. Heat the metal around edges of the screen.

  • Avoid heating the rubber watch band as it will quickly melt.

  • Heating the LCD screen may damage it. Avoid this procedure unless you intend to replace the screen.

Add Comment

Add Comment

Use metal tweezers to gently detach the orange press-fit (or "pop") connector. Use metal tweezers to gently detach the orange press-fit (or "pop") connector.
  • Use metal tweezers to gently detach the orange press-fit (or "pop") connector.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Chris Syracuse

Member since: 02/20/2017

446 Reputation

4 Guides authored

Team

USF Tampa, Team S1-G5, Leahy Spring 2017 Member of USF Tampa, Team S1-G5, Leahy Spring 2017

USFT-LEAHY-S17S1G5

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 13

Past 30 Days: 81

All Time: 484