Introduction

This guide will show you how to dissemble the microphone. Before you start you need to have a set of screw drivers (Philips head #00, #2, #0). To reassemble the microphone just reverse the steps.

For names of the microphone parts, please click below:

Microphone Parts' Manual

Image 1/1:
  • Remove the windscreen. Using the Phillips head (#00) screwdriver, unscrew the diaphragm from the bottom base of the microphone.

Add Comment

Image 1/2: Image 2/2:
  • Separate the microphone into two pieces to reveal the internal shield cover.

Add Comment

Image 1/2: This should free up the bottom base so that it can be separated from the microphone. Image 2/2: This should free up the bottom base so that it can be separated from the microphone.
  • By unscrewing in a clockwise motion remove the bottom base of the microphone.

  • This should free up the bottom base so that it can be separated from the microphone.

Add Comment

Image 1/1:
  • Using the Phillips head (#2) screwdriver, remove screw directly above the battery by rotating counterclockwise.

Add Comment

Image 1/1:
  • Using the Phillips head (#0) screwdriver to remove the black screw near the bottom of the microphone.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use the heavy duty spudger to detach the grip area from the microphone. The inside of the diaphragm should now be visible.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Attached Documents

Kefaya

Member since: 01/23/2014

343 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 13

Past 30 Days: 55

All Time: 1,517