Fix Your Stuff Community Store

Maze Speed SSB-508 Power and Volume Button Replacement

Introduction

This guide will show you how to replace the power and volume buttons in a Maze Speed SSB-508 phone. If the power or volume buttons are unresponsive or malfunctioning, they may need to be replaced. To complete this guide, a plastic opening tool, tweezers, and a new button piece is required. Precision is recommended, as to not damage any components.

What you need

  1. Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: step 1, image 1 of 3 Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: step 1, image 2 of 3 Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: step 1, image 3 of 3

    • Remove the back cover by gently prying open the bottom left corner of the case with the plastic opening tool.

    Edit

  3. Maze Speed SSB-508 Power and Volume Button Replacement: step 2, image 1 of 2 Maze Speed SSB-508 Power and Volume Button Replacement: step 2, image 2 of 2

    • There are three areas holding the power and volume buttons in place. Gently pull the bottom of the power button with a pair of fine-tip tweezers to release the lower half.

    Edit

  4. Maze Speed SSB-508 Power and Volume Button Replacement: step 3, image 1 of 3 Maze Speed SSB-508 Power and Volume Button Replacement: step 3, image 2 of 3 Maze Speed SSB-508 Power and Volume Button Replacement: step 3, image 3 of 3

    • Carefully remove the top section of the button with the fine-tip tweezers . This should free the button completely.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 285