Introduction

This guide walks your through the steps required to replace the trigger on the Makita DT01 drill.

Parts

No parts required.

  1. Take out the beterry.
    • Take out the beterry.

    Add Comment

  2. Unscrew the six screws on the top of the drill.
    • Unscrew the six screws on the top of the drill.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Place the big trigger out to be able to remove the other trigger smoothly.

    Add Comment

    • Take out the broken trigger.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ya'Rub Al Manwari

Member since: 02/15/2017

201 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 42