Mad Catz Dual Force 2 Pro Rear Cover Replacement

Introduction

This guide will teach you how to remove and replace the rear cover of a Mad Catz Dual Force 2 Pro controller. If you need to repair the controller or access the internals of your controller you will need to remove the rear cover.

What you need

Step 1 Remove the Screws

Mad Catz Dual Force 2 Pro Rear Cover Replacement, Remove the Screws: step 1, image 1 of 1

Using the Phillips #1 screwdriver, remove the six 7 mm screws from the rear cover.

Edit

Step 2

After removing the screws, you will be able to lift the rear cover of the controller.
There are no loose items in the controller that can fall out, so you can open it without extreme caution.

Edit