Mad Catz Dual Force 2 Pro Buttons Replacement

Introduction

Please remember that these controllers are not designed to be repaired so do not be surprised if you need to be rough with it or something was not initially installed correctly. Also, the same kind of screw was used throughout the controller.

What you need

Step 1 Buttons

Mad Catz Dual Force 2 Pro Buttons Replacement, Buttons: step 1, image 1 of 1

Remove the six 7 mm Phillips screws from the rear cover.

Edit

Step 2

Remove the back of the controller.
There are no loose items in the controller that can fall out, so you can open it, generally, however you want.

Edit

Step 3

Remove the two 7 mm screws on the closest circuit board.

Edit

Step 4

Lift the closest circuit board away from the motherboard.
Be sure you do not tear the ribbon connecting the smaller circuit board to the motherboard.

Edit

Step 5

Remove the two 7 mm Philip screws on the larger circuit board.

Edit

Step 6

Remove the motherboard assembly from the cover.

Edit

Step 7

Lift out any of the plastic buttons you want to replace.

Edit

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Alexander Coyne

Member since: 01/11/15

658 Reputation

5 Guides authored

Badges: 8

+5 more badges

Team

USF Tampa, Team 7-2, Remmell Winter 2015 Member of USF Tampa, Team 7-2, Remmell Winter 2015

USFT-REMMELL-W15S7G2

4 Members

10 Guides authored

Mad Catz Dual Force 2 Pro Buttons Replacement

Introduction

What you need

Step 1 Buttons

Add Comment

Step 2

Add Comment

Step 3

Add Comment

Step 4

Add Comment

Step 5

Add Comment

Step 6

Add Comment

Step 7

Add Comment

Author

Alexander Coyne

Team

USF Tampa, Team 7-2, Remmell Winter 2015 Member of USF Tampa, Team 7-2, Remmell Winter 2015

0 Comments

Add Comment

Embed this guide

Preview