MacBook Pro 17" Unibody Lower Case Replacement

You're viewing a previously published version of this guide. View latest version

Jul 07, 2018 - 08:18:24

Jul 09, 2018 - 09:27:14 Jul 09, 2018 - 09:26:59 Jul 07, 2018 - 08:18:24 Feb 13, 2018 - 11:22:43 Feb 24, 2015 - 12:41:13 Feb 24, 2015 - 12:41:13 Nov 04, 2014 - 06:20:27 Feb 17, 2017 - 09:19:14 Nov 04, 2014 - 06:18:13 Nov 04, 2014 - 06:18:13 Jul 31, 2013 - 04:59:52 Apr 01, 2011 - 03:43:09 Sep 10, 2010 - 03:53:49 Aug 03, 2010 - 04:21:17 Jul 30, 2010 - 04:23:34 Jul 29, 2010 - 05:38:33 Jul 29, 2010 - 05:38:31 Jul 28, 2010 - 12:53:22 Jul 28, 2010 - 12:53:21 Jul 28, 2010 - 12:50:27 Jul 28, 2010 - 12:50:16

Newer

Introduction

Remove the lower case to access most components in your MacBook Pro 17" Unibody.

What you need

Step 1 Lower Case

MacBook Pro 17" Unibody Lower Case Replacement, Lower Case: step 1, image 1 of 1

Remove the following ten screws securing the lower case to the upper case:
Three 13.5 mm Phillips screws.
Seven 3 mm Phillips screws.

Step 2

Wedge your fingers between the lower case and the vent, and lift upward to release the clips holding the lower case to the upper case.
Remove the lower case.