Fix Your Stuff Community Store

MacBook Pro 15" Unibody Mid 2009 Lower Case Replacement

Introduction

Remove the lower case to access most of your MacBook Pro's internals.

What you need

  1. MacBook Pro 15" Unibody Mid 2009 Lower Case Replacement, Lower Case: step 1, image 1 of 1

    • Remove the following ten screws securing the lower case to the upper case:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

    Edit

    May be helpful to have more distinct colors to identify the different screws.

    Victor Caamano - Reply

  3. MacBook Pro 15" Unibody Mid 2009 Lower Case Replacement: step 2, image 1 of 2 MacBook Pro 15" Unibody Mid 2009 Lower Case Replacement: step 2, image 2 of 2

    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

35 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 22

All Time: 20,160