MacBook Pro 15" Unibody Mid 2009 Lower Case Replacement

Remove the lower case to access most of your MacBook Pro's internals.

Edit Step 1 Lower Case  ¶ 

Image #1

Edit Step 1 Lower Case  ¶ 

  • Remove the following ten screws securing the lower case to the upper case:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

Edit Step 2  ¶ 

Image #1

Edit Step 2  ¶ 

  • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

  • Remove the lower case and set it aside.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the MacBook Pro 15" Unibody Mid 2009 device page.

Required Tools

Phillips #00 Screwdriver

$5.95 · 50+ In stock

Related Products

Recommended Tools

54 Bit Driver Kit

$29.95 · 50+ In stock

Pro Magnetic Project Mat

$19.95 · 50+ In stock

Pro Tech Screwdriver Set

$59.95 · 50+ In stock

Anti-Static Project Tray

$4.95 · 50+ In stock

Comments Comments are onturn off

No comments.

View Statistics:

Past 24 Hours: 5

Past 7 Days: 23

Past 30 Days: 95

All Time: 15,679