Introduction

Remove the lower case to access most of your MacBook Pro's internals.

Remove the following ten screws securing the lower case to the upper case:
  • Remove the following ten screws securing the lower case to the upper case:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

Add Comment

Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
  • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

  • Remove the lower case and set it aside.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

24 other people completed this guide.

Team

iFixit Member of iFixit

Community

130 Members

6,633 Guides authored

One Comment

These two little plastic clamps on the upper case that snap on/off the lower case broke. I was looking through the store for replacements but I couldn't find any. Does anyone know where I can get these?

hmalissa - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 42

All Time: 13,766