Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

Pre-req only

Parts

No parts specified.

  1. Remove the single 3.1 mm T5 Torx screw securing the SSD to the logic board.
    • Remove the single 3.1 mm T5 Torx screw securing the SSD to the logic board.

  2. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  3. Slightly lift the rightmost side of the SSD and firmly slide it straight away out of its socket on the logic board. Slightly lift the rightmost side of the SSD and firmly slide it straight away out of its socket on the logic board.
    • Slightly lift the rightmost side of the SSD and firmly slide it straight away out of its socket on the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

Member since: 04/12/2010

116,512 Reputation

143 Guides authored

Team

iFixit Member of iFixit

Community

115 Members

11,167 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 14

All Time: 1,216