MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement

You're viewing a previously published version of this guide. View latest version

Aug 14, 2014 - 08:32:50

Jul 13, 2020 - 11:53:15 Jul 13, 2020 - 11:50:21 May 30, 2018 - 08:30:48 May 28, 2018 - 04:38:43 Aug 14, 2014 - 08:32:50 Aug 08, 2014 - 01:04:18 Aug 08, 2014 - 01:04:13 Aug 07, 2014 - 03:26:28 Aug 06, 2014 - 03:48:13 Jul 31, 2014 - 04:50:15 Jul 31, 2014 - 04:49:27 Jul 31, 2014 - 04:40:27 Jun 25, 2014 - 04:42:20 Jun 25, 2014 - 04:05:38 Jun 25, 2014 - 04:01:09 Jun 25, 2014 - 03:58:59 Jun 25, 2014 - 03:55:37 Jun 25, 2014 - 03:53:23

Newer

Introduction

Use this guide to replace the lower case.

What you need

Step 1 Lower Case

MacBook Pro 13" Retina Display Late 2013 Lower Case Replacement, Lower Case: step 1, image 1 of 1

Remove the following ten screws securing the lower case to the upper case:
Two 2.3 mm Pentalobe screws
Eight 3.0 mm Pentalobe screws

Step 2

Wedge your fingers between the upper case and the lower case.
Gently pull the lower case away from the upper case to remove it.

Step 3

The lower case is connected to the upper case with two plastic clips near its center.
During reassembly, gently push down the center of the lower case to reattach the two plastic clips.