2011 Ford Fiesta Headlight Replacement
Phillip Kataswa and 2 other contributors
Last updated on Jan 21, 2023
Views: 9.9K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 26
- Past 30 Days:
- 124
- All Time:
- 9,851
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓This guide shows readers how to replace the indicator light bulb for a 2011 Ford Fiesta. This bulb signals other drivers while making lane changes on the road. The frequent use of the indicator bulb can cause the fuse to blow, or at times the bulb will burn out. In this guide, I will provide steps needed to replace the bulb. I also want to encourage readers to fix simple car repairs and hopefully use the skills gained in the other parts of their lives. People spend thousands of dollars on car repairs each year. I want to show readers that a mechanical background is sometimes not needed and that people can save a lot of money by using this guide.
What you need
-
-
-
Make sure there is space to insert fingers. If not, repeat step 2.
-
Push the yellow hood release to the left to open the hood.
-
-
-
Lift the hood with one hand and place the strut upright in the correct position.
-
Place strut in the hole to the left of the hood.
-
-
-
Carefully remove the headlight.
-
Gently pull up and towards your body.
-
Set the headlight to the side.
-
-
-
-
Press both ends of the bulb container to remove the electrical connector from the bulb container.
-
-
-
Pull out the bulb from the headlight.
-
Press both ends of the electrical connector to separate from the bulb container.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
York University, Team S2-G13, Melo-Thaiss Summer 2021 Member of York University, Team S2-G13, Melo-Thaiss Summer 2021
YORK-MELO-THAISS-SU21S2G13
1 Member
12 Guides authored
