MacBook Core 2 Duo Memory Cover Replacement
iRobot and
Last updated on Aug 24, 2025
Views: 35K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 31
- Past 30 Days:
- 115
- All Time:
- 35,414
Comments: 25
25 comments on steps.
Completed: 54 55
54 people have marked this guide "completed." Will you be next?
55 people have marked this guide "completed." Including you — great job!
Favorites: 10 11
10 people have favorited (and subscribed to) this guide. Will you be next?
11 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓This keeps the RAM levers out of the way of the battery and secures the hard drive.
What you need
-
-
-
Use a coin or spudger to rotate the battery-locking screw 90 degrees clockwise.
Ask FixBot
-
-
-
-
-
-
Unscrew the three evenly-spaced Phillips 000 screws from along the rear wall of the battery compartment.
-
-
-
Grasp the right end of the L-shaped memory cover, then pull it towards you so it clears the battery compartment opening.
-
Lift the memory cover up and out of the computer.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
54 other people completed this guide.
