Introduction

The RAM cover keeps the RAM detachment lever from interfering with the battery and plays a role in protecting the HDD.

  1. Rotate the battery latch  90°  in clockwise with a coin.
    • Rotate the battery latch 90° in clockwise with a coin.

    Add Comment

  2. Lift the hatch, and remove it from the laptop
    • Lift the hatch, and remove it from the laptop

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Please remove the three Phillips screws equally spaced on the partition of the battery on the back side of the main unit.

    • Since the screw is fixed to the metal memory cover, there is no worry of losing it.

    • (Translator's Comment) Although I am unable to turn Phillips (Phillips) screws in accordance with the JIS standards sold in Japan, since it does not mean that the shapes are perfectly matched, There is a possibility that it may not be possible to reassemble in the worst case because it is scraped.

    • Drivers for Phillips screws are sold with the notation PHxxx or PH # xxx if going to a home center etc. (x is a number, it is like 000, 00, 0, 1, 2 ... from the smallest tip order). Or you can also purchase it at the iFixit store because it is sold.

    Add Comment

    • Pull the L-shaped RAM cover towards you and remove it from the laptop.

    Add Comment

Conclusion

To reassemble your device, follow these steps in reverse order.

One other person completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Uhucream

Member since: 10/04/2015

257 Reputation

4 Guides authored

Team

Japanese Translators Member of Japanese Translators

Community

2 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 20

All Time: 303