Introduction

Remove the lower case to access your MacBook Air's internals.

    • Before proceeding, close your computer and lay it on a soft surface top-side down.

    • Remove the following ten screws:

    • Two 9 mm 5-point Pentalobe screws

    • Eight 2.6 mm 5-point Pentalobe screws

    • The special screwdriver needed to remove the eight 5-point Pentalobe screws can be found here.

  1. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  2. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

    • Remove the lower case and set it aside.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 18

All Time: 9,190