Introduction
This unit includes the hard drive, fan, and optical drive.
What you need
-
-
Grasp the Airport antenna board and lift it off of the two plastic posts holding it in place. You may need to push back the black plastic tab jutting through the lower left corner of the board.
-
-
-
-
Remove the three black Phillips screws securing the plastic framework to the logic board and lower case.
-
-
-
Grasp the optical drive and mass storage unit in one hand and lift up enough so that you can see beneath it.
-
-
-
With your free hand, pull the Bluetooth cable up from Bluetooth board and unplug the Airport antenna cable from the right of the Airport card.
-