Introduction

If you experience any issues with fans not working properly or not functioning at all, this guide will help you remove them from the computer for inspection or replacement.

Parts

No parts required.

  1. Remove the seven 6 mm Phillips #00 screws on the back cover of the laptop with the PH0 Bit screwdriver.
    • Remove the seven 6 mm Phillips #00 screws on the back cover of the laptop with the PH0 Bit screwdriver.

    • Every screw in this guide can be removed with the same PH0 Bit screwdriver.

  2. Lift the back cover off by lifting by the tab on the bottom of the cover as indicated.
    • Lift the back cover off by lifting by the tab on the bottom of the cover as indicated.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Detach the two indicated wires by pulling upward on them. Detach the two indicated wires by pulling upward on them.
    • Detach the two indicated wires by pulling upward on them.

  5. Unscrew a total of four 10mm Philips #00 screws (two screws per fan) as indicated.
    • Unscrew a total of four 10mm Philips #00 screws (two screws per fan) as indicated.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Michael Petralia

Member since: 04/18/2017

128 Reputation

1 Guide authored

Team

Cal Poly, Team S17-G2, Banghart Spring 2017 Member of Cal Poly, Team S17-G2, Banghart Spring 2017

CPSU-BANGHART-S17S17G2

5 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 25

All Time: 833