Skip to main content

Introduction

Use this guide to remove the bottom cover of the MSI GP62VR 6RF Leopard Pro.

Parts

No parts specified.

  1. Place the laptop upside down. Remove the sixteen 5.5 mm screws with a Phillips #0 screwdriver.
    • Place the laptop upside down.

    • Remove the sixteen 5.5 mm screws with a Phillips #0 screwdriver.

  2. Use the Jimmy tool to evenly pry loose the bottom cover. Ensure that all sides are detached from the plastic hinging before attempting to remove the bottom cover.
    • Use the Jimmy tool to evenly pry loose the bottom cover.

    • Ensure that all sides are detached from the plastic hinging before attempting to remove the bottom cover.

  3. Remove the back cover.
    • Remove the back cover.

    • Touching circuitry could damage components or result in personal shock; it is recommended that you now wear latex gloves to prevent both issues.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 20