Introduction

This replacement guide will show you how to replace the speaker for this device. It is a simple and easy procedure that we will show you how to do at home step by step.

Parts

No parts required.

Separate the back of the device from the face by inserting the flat end of the nylon spudger into the corner of the device to safely pry it open. Separate the back of the device from the face by inserting the flat end of the nylon spudger into the corner of the device to safely pry it open.
  • Separate the back of the device from the face by inserting the flat end of the nylon spudger into the corner of the device to safely pry it open.

Remove the 4.1 mm screws connecting the speaker to the device by using the Phillips Head J #000. Remove the 4.1 mm screws connecting the speaker to the device by using the Phillips Head J #000.
  • Remove the 4.1 mm screws connecting the speaker to the device by using the Phillips Head J #000.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Remove the plastic cover from the speaker by pulling it off gently with your hands. Remove the plastic cover from the speaker by pulling it off gently with your hands.
  • Remove the plastic cover from the speaker by pulling it off gently with your hands.

Remove wires from the device with a solder iron.  Use the soldering technique guide for helpful tips!
Conclusion

To reassemble your device, follow these instructions in reverse order.

Katalina Benecke

Member since: 10/10/2016

364 Reputation

3 Guides authored

Team

Texas Tech, Team 1-13, Bennett Fall 2016 Member of Texas Tech, Team 1-13, Bennett Fall 2016

TTU-BENNETT-F16S1G13

5 Members

3 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 69