Introduction
This guide will show you how to take apart and replace the locking hinge on a MACTREM tripod leg. while I am replacing a locking hinge, this guide shows how to replace and maintenance any piece of the leg.
What you need
-
-
-
Use the center punch and hammer to tap the pin out of the locking mechanism hinge.
-
Remove the locking mechanism lever.
-
-
-
Use the center punch and hammer to tap the pin out of the locking hinge on the opposite side of the damaged leg.
-
Remove the lever from the locking mechanism.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Austin Community College, Team 52-4, Watkins Fall 2025 Member of Austin Community College, Team 52-4, Watkins Fall 2025
AUSTINCC-WATKINS-F25S52G4
1 Member
1 Guide authored
