Introduction

Hey, we are a group of students from Central Coast New Tech High working on out iFixit project.

Pull the top off using your hands or the plastic opening tool.
  • Pull the top off using your hands or the plastic opening tool.

Add Comment

Unscrew the four screws(7.1cm) seen after taking the top off.
  • Unscrew the four screws(7.1cm) seen after taking the top off.

Add Comment

Pry that silver piece off that you just took the four screws out of.
  • Pry that silver piece off that you just took the four screws out of.

Add Comment

Take the camera out of the red part. You should have 3 piece not including the top.
  • Take the camera out of the red part. You should have 3 piece not including the top.

Add Comment

Take the 3 screws(.5) out of the middle piece.
  • Take the 3 screws(.5) out of the middle piece.

Add Comment

After taking that off you will see the camera lens.
  • After taking that off you will see the camera lens.

Add Comment

Pry the piece hanging off with tweezers.
  • Pry the piece hanging off with tweezers.

Add Comment

Now you can unscrew the three screws(.5) seen releasing the camera lense from the camera.
  • Now you can unscrew the three screws(.5) seen releasing the camera lense from the camera.

Add Comment

After that you can pull it off with the tweezers.
  • After that you can pull it off with the tweezers.

Add Comment

Now that you have it off you can replace it and reverse the steps getting it back together.
  • Now that you have it off you can replace it and reverse the steps getting it back together.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jeremiah Killam-Hull

Member since: 02/08/2017

109 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 50