Introduction
This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.
What you need
-
-
-
Use a Phillips screwdriver to remove the five screws securing the lower cable shield to the logic board:
-
Two 2.0 mm screws
-
Three 1.3 mm screws
Ask FixBot
-
-
-
Tool used on this step:Tweezers$4.99
-
Use tweezers or your fingers to grab and remove the lower cable shield.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
