Introduction
Is your receiver screen cracked, broken, or pixelated? Try replacing the screen to solve this problem.
What you need
-
-
Remove the battery cover on the back of the LCD monitor by unscrewing one 5mm Phillips #1 screw.
-
Slide the battery out of the housing. Lightly tap the opposite end of the monitor if the battery does not come right out.
-
-
-
Using a plastic opening tool, gently separate the back panel from the front panel, working the tool around the panel to disconnect it.
-
Carefully remove the back panel
-
-
-
-
Locate the motherboard and carefully pull the red and black speaker wires out of their harness.
-
-
-
Peel away the yellow tape that is covering the large harness.
-
Use needle-nosed tweezers to pull out the black tabs that are holding the film in the harness and gently pull the film out of the harness.
-