Introduction

Follow this guide to remove and replace the USB cable of your webcam. Knowledge of soldering is necessary in order to install a new cable.

Remove the two 8mm Phillips#0 screws on the back cover.
  • Remove the two 8mm Phillips#0 screws on the back cover.

  • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

  • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

Add Comment

Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover.
  • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

  • DO NOT detach the wire connecting the motherboard to the front cover.

Add Comment

  • Grasp the white wire connector on the back of the motherboard to remove the USB cable.

  • Wiggle the connector back and forth to remove it from the socket.

Add Comment

  • Desolder the joint on the front of the motherboard to completely detach the USB cable.

  • Follow this link to learn how to properly solder and desolder your parts.

Add Comment

  • Wedge the pointy end of the spudger between the sliver E-ring and USB attachment base to extract the E-ring.

Add Comment

  • Feed the now free end of the USB cable through the back cover.

sir where i baught logitech pro 9000 cable

Shiva Ji Sachan - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Cory Davis

Member since: 04/14/2013

236 Reputation

4 Guides authored

Team

Cal Poly, Team 12-34, Amido Spring 2013 Member of Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 Members

8 Guides authored

2 Comments

Ich habe auch. ich braucht neu Kabel für C910 aber wo finden?

wohlgemuth1981 - Reply

where i baught pro 9000 Cable

Shiva Ji Sachan - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 23

All Time: 4,212