Fix Your Stuff Community Store

Logitech G920 Driving Force Motor Motherboard Replacement

Introduction

Use this guide to replace the motor's motherboard for your Logitech G920 Driving Force Steering Wheel.

What you need

  1. Logitech G920 Driving Force Motor Motherboard Replacement, Motor Motherboard: step 1, image 1 of 1

    • Use the Phillips #0 screwdriver to remove the five 9.5 mm external screws.

    • Only three of the five screws are visible from each side of the wheel due to the center unit.

    Edit

  2. Logitech G920 Driving Force Motor Motherboard Replacement: step 2, image 1 of 1

    • Using the Phillips #0 screwdriver, remove the 5 mm screws holding the bumpers in place.

    Edit

  3. Logitech G920 Driving Force Motor Motherboard Replacement: step 3, image 1 of 2 Logitech G920 Driving Force Motor Motherboard Replacement: step 3, image 2 of 2

    • Using the TR25 Torx Security Screwdriver, remove the six 23.8 mm screws holding the face plate together.

    • Remove the face plate from the steering wheel.

    Edit

  4. Logitech G920 Driving Force Motor Motherboard Replacement: step 4, image 1 of 2 Logitech G920 Driving Force Motor Motherboard Replacement: step 4, image 2 of 2

    • Remove the wheel from the main steering wheel console.

    • Ensure this is done carefully as to not damage the connection wire.

    Edit

  6. Logitech G920 Driving Force Motor Motherboard Replacement: step 5, image 1 of 2 Logitech G920 Driving Force Motor Motherboard Replacement: step 5, image 2 of 2

    • Remove the four 13.5 mm screws with a Phillips #0 screwdriver.

    Edit

  7. Logitech G920 Driving Force Motor Motherboard Replacement: step 6, image 1 of 2 Logitech G920 Driving Force Motor Motherboard Replacement: step 6, image 2 of 2

    • Remove the pedals from both sides of the wheel base.

    Edit

  8. Logitech G920 Driving Force Motor Motherboard Replacement: step 7, image 1 of 1

    • Remove the three 36 mm screws with a Phillips #2 screwdriver.

    Edit

  9. Logitech G920 Driving Force Motor Motherboard Replacement: step 8, image 1 of 3 Logitech G920 Driving Force Motor Motherboard Replacement: step 8, image 2 of 3 Logitech G920 Driving Force Motor Motherboard Replacement: step 8, image 3 of 3

    • Remove the wheel base from the motor box.

    Edit

  10. Logitech G920 Driving Force Motor Motherboard Replacement: step 9, image 1 of 1

    • Flip the motor box over.

    • Remove the twelve 12.2 mm screws with a Phillips #0 screwdriver.

    • Remove the two 11.5 mm screws with a Phillips #0 screwdriver.

    Edit

  11. Logitech G920 Driving Force Motor Motherboard Replacement: step 10, image 1 of 2 Logitech G920 Driving Force Motor Motherboard Replacement: step 10, image 2 of 2

    • Flip over the motor box once more.

    • Remove the motor box cover.

    Edit

  12. Logitech G920 Driving Force Motor Motherboard Replacement: step 11, image 1 of 3 Logitech G920 Driving Force Motor Motherboard Replacement: step 11, image 2 of 3 Logitech G920 Driving Force Motor Motherboard Replacement: step 11, image 3 of 3

    • Remove the four 5 mm screws with a Phillips #0 screwdriver.

    • Detach the wires connected to the motherboard.

    • Remove the motherboard from the motor box.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 11

Past 7 Days: 59

Past 30 Days: 193

All Time: 781