Use fingers or nylon spudger to peel old feet off of all three corners where the screw holes are exposed. Use fingers or nylon spudger to peel old feet off of all three corners where the screw holes are exposed. Use fingers or nylon spudger to peel old feet off of all three corners where the screw holes are exposed.
  • Use fingers or nylon spudger to peel old feet off of all three corners where the screw holes are exposed.

Add Comment

Peel the backing off the new mouse feet to reveal the adhesive. Peel the backing off the new mouse feet to reveal the adhesive. Peel the backing off the new mouse feet to reveal the adhesive.
  • Peel the backing off the new mouse feet to reveal the adhesive.

Add Comment

Deck the Halls
With tools and Fix Kits
Apply the new mouse feet to their designated areas based on shape Apply the new mouse feet to their designated areas based on shape Apply the new mouse feet to their designated areas based on shape
  • Apply the new mouse feet to their designated areas based on shape

Add Comment

Apply even pressure across the mouse feet to ensure adherence.
  • Apply even pressure across the mouse feet to ensure adherence.

Add Comment

Let adhesive sit for about 5-10 minute with applied pressure.
  • Let adhesive sit for about 5-10 minute with applied pressure.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sage Farray

Member since: 04/10/2017

310 Reputation

3 Guides authored

Team

UW Tacoma, Team S3-G1, Liner Spring 2017 Member of UW Tacoma, Team S3-G1, Liner Spring 2017

UWT-LINER-S17S3G1

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 43

Past 30 Days: 169

All Time: 1,016