Introduction
The Logitech B100 mouse is an simple and inexpensive mouse. Also the disassembly is very easy.
What you need
-
-
-
Open the gap with your fingernail or the flat end of a spudger.
-
Slide the upper part in direction of the mouse calbe. Use your other hand to hold the lower part of the mouse.
-
Remove the upper part and put it aside.
-
-
-
Lift the assembly of the mouse wheel.
-
Spring for haptical feedback while scrolling the mouse wheel.
-
Spring for reset the position after a mouse wheel click.
-
-
-
-
Find the four plastic clips. They hold the two upper parts together.
-
Release the two plastic clips at the back.
-
Release the two plastic clips in the middle.
-
Ask FixBot
Reverse the steps to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
Xare is helping us fix the world! Want to contribute?
Start translating ›
1 Guide Comment
Thanks for the guide. The wheel of my B100 mouse is not working properly recently. When I follow the guide and take it apart, I realized the dirt on the wheel is blocking the laser sensor on the left. After cleaning the dirt with a toothbrush the problem is fully solved.
Thanks again for the guide, it really helps.
