Introduction
Use this guide to remove or replace the blade on a Little Wonder 4 HP Honda Pro Edger 62320001 Rev B.
What you need
-
-
Use a 3/4 inch socket and ratchet to remove the nut securing the blade.
-
Brace the left side of the blade against the ground in order to loosen the nut. Brace the right side of the blade against the ground for tightening.
-
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
