Introduction

Will your groovy disco ball not turn on? This guide will teach you to remove and replace the switch so you can get back to your partying.

Image 1/2: Use a Phillips head screwdriver to unscrew the single screw. Image 2/2: Hold on to the nut from the other side so you do not lose it.
  • Unplug the device to avoid injury.

  • Use a Phillips head screwdriver to unscrew the single screw.

  • Hold on to the nut from the other side so you do not lose it.

  • Remove the panel that conceals the switch.

Add Comment

Image 1/1:
  • Hold on to the red disc with needle nosed pliers and use the Phillip's head screwdriver to remove the disc by pushing down.

Add Comment

Image 1/2: Do not be afraid to pull as this takes a bit of force to remove. Image 2/2: Do not be afraid to pull as this takes a bit of force to remove.
  • Remove and replace the white switch.

    • Do not be afraid to pull as this takes a bit of force to remove.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Courtney Elliott

Member since: 01/14/2014

332 Reputation

3 Guides authored

Team

Cal Poly, Team 17-3, Forte Winter 2014 Member of Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 6

All Time: 393