Introduction

Is something wrong with your disco ball and you need to remove the ball to get to the other parts of your device? This guide will show you how so you can return to the party!

Parts

No parts required.

Image 1/1: Turn the device over, so that the base is on top.
  • Unplug the device to avoid injury.

  • Turn the device over, so that the base is on top.

Add Comment

Image 1/3: While compressing the tab, peel the base away from the rotating head. Image 2/3: While compressing the tab, peel the base away from the rotating head. Image 3/3: While compressing the tab, peel the base away from the rotating head.
  • Compress the tab by pushing towards the center of the device with a spudger or flathead screwdriver.

  • While compressing the tab, peel the base away from the rotating head.

Add Comment

Image 1/1:
  • If the metal brackets come off of the sphere, put them back on the plastic piece as shown in the photo.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Courtney Elliott

Member since: 01/14/2014

332 Reputation

3 Guides authored

Team

Cal Poly, Team 17-3, Forte Winter 2014 Member of Cal Poly, Team 17-3, Forte Winter 2014

CPSU-FORTE-W14S17G3

5 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 8

All Time: 506