Fix Your Stuff Community Store

Levoit LV-H132 Springs Replacement

Introduction

If the touch mechanism on your Levoit LV-H132 device is not working when it's switched on, the touch button springs might be damaged due to exposure to extreme temperatures, humidity, or corrosive chemicals.

What you need

  1. Levoit LV-H132 Springs Replacement, Springs: step 1, image 1 of 2 Levoit LV-H132 Springs Replacement, Springs: step 1, image 2 of 2

    • Pry off the plastic top using a metal spudger.

    Edit

  2. Levoit LV-H132 Springs Replacement: step 2, image 1 of 2 Levoit LV-H132 Springs Replacement: step 2, image 2 of 2

    • Remove the three 1.2 mm screws with a Phillips #1 screwdriver.

    Edit

  4. Levoit LV-H132 Springs Replacement: step 3, image 1 of 2 Levoit LV-H132 Springs Replacement: step 3, image 2 of 2

    • Disconnect the top half from the bottom.

    Edit

  5. Levoit LV-H132 Springs Replacement: step 4, image 1 of 3 Levoit LV-H132 Springs Replacement: step 4, image 2 of 3 Levoit LV-H132 Springs Replacement: step 4, image 3 of 3

    • Disconnect the circuit board cable.

    Edit

  6. Levoit LV-H132 Springs Replacement: step 5, image 1 of 2 Levoit LV-H132 Springs Replacement: step 5, image 2 of 2

    • Remove the two 5 mm screws with a Phillips #1 screwdriver.

    Edit

  7. Levoit LV-H132 Springs Replacement: step 6, image 1 of 1

    • Desolder the joints holding the springs.

    • Slide out the faulty springs.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 72